The molding filling process is a very important phase in RTM.
樹脂充模是RTM工藝成型過程中的重要一環.
互聯網
The history advantages and process of RTM are emphatically introduced.
重點介紹了RTM工藝 的發展史、優越性及成型工藝.
互聯網
The resin flow in RTM process for thick section parts was investigated.
針對厚截面構件的RTM工藝過程,研究了三維樹脂流動問題.
互聯網
The cure kinetic model and kinetic parameters of BMI resin for RTM are studied by DSC.
采用DSC方法研究RTM專用 雙馬來酰亞胺樹脂的固化動力學模型與固化動力學參數.
互聯網
The study of this paper can enlarge considerably the area of application of RTM.
論文的研究對提高RTM制品 質量和拓寬RTM工藝的應用領域具有重要的意義.
互聯網
A pair of mold is designed for the package case with wall rib by RTM process.
本文為生產特種薄壁加筋結構包裝箱而設計、制備了混凝土加固玻璃鋼RTM模具.
互聯網
The impregnation of resin for fiber reinforcement process is a very important phase in RTM.
RTM成型過程中,樹脂對纖維增強體的充分浸潤是非常重要的一環.
互聯網
This product is used primarily for hand lay - up , pultrusion, RTM, and filament winding process, etc.
玻璃纖維縫編短切氈主要用于手糊、拉擠 、 RTM和纏繞等玻璃鋼成型工藝.
互聯網
Liquid direct processing, and RTM in particular, has been proven extremely successful in the automotive industry.
液體直接注塑工藝中, 尤其是樹脂傳遞模塑(RTM) 工藝在汽車業中的應用, 已被證實相當成功.
互聯網
A new implicit numerical algorithm was proposed for mold filling simulation of RTM.
摘要RTM充模分析的隱式方法需要迭代來決定樹脂注滿的區域.
互聯網
The major problems involved in fabricating large, high fiber volume fraction components by RTM, are discussed.
闡述了RTM工藝應用于大尺寸, 高纖維含量構件時存在的主要問題.
互聯網
The monitoring system of fiber Bragg grating for the RTM curing process was established.
提出了RTM工藝 樹脂固化過程殘余應變布拉格光柵傳感器檢測新方法.
互聯網
This paper addresses the Transfer Molding ( RTM ) process. The governing equations of resin flow are presented.
介紹了RTM工藝過程 及特點,給出了樹脂滲流控制方程.
互聯網
This paper designs and manufactures the mould for the composite skirt fabricated by bladder - assisted RTM.
本文設計制備了氣囊輔助RTM工藝用復合裙模具.
互聯網
Malaysia: RTM's Wai FM from Kuching on 7270 kHz - for the Iban and Bidayuh communites in Sarawak.
馬來西亞: RTM的 “ 喂”調頻從古晉在7270千赫的廣播-服務于來自砂勞越的伊班族和比達友族.
互聯網